Notices
4.6L V8 Technical Discussions Any questions about engine, transmission, or gearing can be asked here!

send me your sct datalogs

Thread Tools
 
Search this Thread
 
Old 10-05-2011, 06:25 PM
  #1  
esp3500
1st Gear Member
Thread Starter
 
esp3500's Avatar
 
Join Date: Aug 2011
Location: nc
Posts: 65
Default send me your sct datalogs

Ok before you ask I know this sounds stupid. But I would like to do some comparing of my fuel pump duty cycle and Inj pressure drop and if you have a wide band 02 That would be great also.

Supercharged would be best, but I would like to see others as well.

The Short story is I am still fighting a hesitation on my Roush supercharged 2006 mustang. the hesitation has been there since the SC install.
I have been to a dyno tuner, I have been emailing the crap out of BAMA for help ( they have helped it some ) I have even been on the phone with Mike ( the programer for roush ) about this.

So please send me you datalogs from your sct tuner. I am hoping to find something that we are over looking.

thanks
esp3500 is offline  
Old 10-06-2011, 07:51 PM
  #2  
esp3500
1st Gear Member
Thread Starter
 
esp3500's Avatar
 
Join Date: Aug 2011
Location: nc
Posts: 65
Default

Ok let me make it a little simpler.
Can someone watch their fuel pressure and tell me if it goes below 35 psi under any loads?.
esp3500 is offline  
Old 10-06-2011, 08:19 PM
  #3  
Blacksmoke
The Paranoid One
 
Blacksmoke's Avatar
 
Join Date: Apr 2006
Location: Texas
Posts: 5,320
Default

Might just call Bama or Brenspeed and ask them straight up about the fuel pressure going lower than that.
Blacksmoke is offline  
Old 10-08-2011, 05:57 AM
  #4  
esp3500
1st Gear Member
Thread Starter
 
esp3500's Avatar
 
Join Date: Aug 2011
Location: nc
Posts: 65
Default

Originally Posted by Blacksmoke
Might just call Bama or Brenspeed and ask them straight up about the fuel pressure going lower than that.
I figured out the fuel pressure. It is fine. the SC throws the sensor reading off. I unhooked the vacum line going to the sensor and the pressure is fine. I also installed a manual guage and both read fine. so back to the drawing board.

I called Bama and Roush, Niether were any help.

I am begining to realize that many of these places have tech's that know a lot about computers but not as much about Diagnosis.

You see, I am a Diagostic technician, so I do tend to go overboard when seaching down a problem. So far I have gone deeper than these people have gone, so they don't know what to tell me.

What I really need is someone who is a skilled Ford Mechanic who can answer specific questions.
I have access to the Ford Website the Ford Tachs use, but it doesn't help when you have a modified car.

Last edited by esp3500; 10-08-2011 at 06:00 AM.
esp3500 is offline  
Old 10-19-2011, 08:59 AM
  #5  
chris09
2nd Gear Member
 
chris09's Avatar
 
Join Date: Sep 2008
Location: Around the world
Posts: 236
Default

if your in nc i would go talk to fastlane motorsports in benson. those guys know there stuff and kaleb can tune like a ****.
chris09 is offline  
Old 10-20-2011, 05:44 PM
  #6  
esp3500
1st Gear Member
Thread Starter
 
esp3500's Avatar
 
Join Date: Aug 2011
Location: nc
Posts: 65
Default

Originally Posted by chris09
if your in nc i would go talk to fastlane motorsports in benson. those guys know there stuff and kaleb can tune like a ****.
I accutally called them a couple weeks ago, and yes I may have to spend another $500 letting them tune it for me. I had it tuned in randleman NC back in August ( High Speed Performance )
But they dont ahve the experiance that the guys at fast lane have.
esp3500 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ctgreddy
Street/Strip
13
10-14-2015 09:05 PM
12bigredstang
2005-2014 Mustangs
0
09-24-2015 05:46 PM
12bigredstang
2005-2014 Mustangs
2
09-24-2015 10:43 AM
03blackwidow
4.6L (1996-2004 Modular) Mustang
1
09-20-2015 02:36 PM
kmad61
Tuner Central
0
09-18-2015 05:02 PM



Quick Reply: send me your sct datalogs



All times are GMT -5. The time now is 08:47 AM.