2005 manual engine harness wire color code
05-25-2013, 12:48 PM
#1
1st Gear Member
Thread Starter
Join Date: Feb 2011
Location: Georgia
Posts: 87
2005 manual engine harness wire color code
Hey,
I have an 05 mustang manual engine harness that a guy cut off two connectors. I know one is the o2 sensor and think the other may be something with a speed sensor. In total I have eight unused wires. I know four go to o2 sensor connector but not sure about the others. Any ideas what the other four go to? Also any wiring diagram out there. I can list colors later if it helps. Thanks
I have an 05 mustang manual engine harness that a guy cut off two connectors. I know one is the o2 sensor and think the other may be something with a speed sensor. In total I have eight unused wires. I know four go to o2 sensor connector but not sure about the others. Any ideas what the other four go to? Also any wiring diagram out there. I can list colors later if it helps. Thanks
05-25-2013, 05:11 PM
#2
6th Gear Member
05-26-2013, 12:45 PM
#3
1st Gear Member
Thread Starter
Join Date: Feb 2011
Location: Georgia
Posts: 87
Thanks! Worked perfect. O2 sensor connector, output shaft sensor connector and reversing lamp switch connector are needed. Appreciate the help. Rock auto the best place to buy these or does anyone know of another good site?
Thread
Thread Starter
Forum
Replies
Last Post
bryan616fl
4.6L (1996-2004 Modular) Mustang
10
01-25-2019 09:07 PM