rjwilcox68

recently I had the shaker 500 removed and placed with aftermarket stereo with amps and sub, since then my rpm gauge, speed odometer gauge, and temp gauge doesn't work. Tried resetting computer still nothing also the mileage gauge shows no mileage and has on screen check charging system, also shows odometer reading error tried to pull codes in which gives me an error 1 cannot read the computer. Please any suggestions would be appreciated everything else works fine. Thanks

Ricardo

Get out your manual and start checking fuses

Nuke

Sounds like whoever did your HU install either forgot to connect something or pinched some wires.