mse5787

I was tightening the lug nuts back on rear wheels and one the wheel studs pressed out. The lug nut is pretty well on the stud. Trying to figure out how to get the lug nut off or how to press the stud back in. Any help would be very much appreciated.

acquah20

How does that even happen?!?!!! I assume your trying to take your wheel off but that one lug/stud is just spinning? I don't think you can see the other side of the stud from the axle. I'm stumped on this one if your wheel is still on. The only thing i can think of doing is take it to shop and have them take the caliper and bracket off if there is enough wiggle room and then maybe dump the diff cover and remove that side axle and grab the stud from behind. Sucks