Turbo replacement
08-11-2012, 12:20 PM
#1
Thread Starter
Join Date: Nov 2011
Location: in
Posts: 2
Turbo replacement
The IHI is toast. Stock computer ,35 injectors,ported head with stock size valves.Keeping stock cam till I get the car running.E6 manifold.Looking at a turbo with these specs Compressor Specs:
- 3" compressor inlet.
- 2.130" Inducer.
- 2.755" Major.
- 2" Compressor Outlet.
- T04B/T4 Type Compressor Housing.
- Compressor .50 AR
- Compressor 57 Trim
- 6 Blade T4 type compressor wheel.
Turbine Specs :
- T3 Type Turbine flange.
- T3 5 bolt flange.
- Turbine .63 A.R.
- 2.205" Minor and 2.570" Major Propellar.
- T3 Turbine Housing.
- 2.274" Outlet.
- 10 Blade Type Turbine.
Any imput and recommendations welcome. Thanks.
- 3" compressor inlet.
- 2.130" Inducer.
- 2.755" Major.
- 2" Compressor Outlet.
- T04B/T4 Type Compressor Housing.
- Compressor .50 AR
- Compressor 57 Trim
- 6 Blade T4 type compressor wheel.
Turbine Specs :
- T3 Type Turbine flange.
- T3 5 bolt flange.
- Turbine .63 A.R.
- 2.205" Minor and 2.570" Major Propellar.
- T3 Turbine Housing.
- 2.274" Outlet.
- 10 Blade Type Turbine.
Any imput and recommendations welcome. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post