Indy88colts

I'm installing a new intake manifold on my 96 gt and my digital camera is broken. Does any body have or could take some pics of where all the vacuum lines are so when I go to put everything back together , I don't run into problems with the vacuum lines. Everything else i'm pretty sure I can get but I might not remember where all the vacuum lines were. Any help would be greatly appreciated.

Thank you,
Mark

oxfordgt

They will only go where they reach. Impossible to mess it up.

Indy88colts

Well from what I remember , there isn't a whole lot of vacuum lines , I know the driver side there is like 2 of them. 1 going to the erg and the other to whatever it is. The passenger side has more but a pic would be great so I make sure I don't screw it up. I'm infamous for taking things apart and not being able to put it back together right and this is my first time tackling a decent sized project on my car. I have everything off right now except the old manifold, just waiting on the new one to arrive.

oxfordgt

There is one in the back of the plenum for the evap canister, on the drivers side there is one that goes on the EGR and the Fuel pressure sensor (the "whatever it is"). On the front of the plenum right after the TB is the one that has the small red vacum lines that run to the EGR and FPS. On the front right of the plenum just past the IAC is for the pcv which runs to the passengerside valve cover. The IAC runs to the intake tube.

Indy88colts

I pretty much know where they go, just thought someone would help me out with a couple pics so I can use as reference.

Thank you

BlackMage

https://mustangforums.com/m_3833004/tm.htm
hope this helps man

oxfordgt

LOL go look in the underhood pics thread. Im sure you'll find what your looking for.

Indy88colts

Thanks , that should be good. I appreciate it.

Mark