4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Not your average X-pipe question

Thread Tools
 
Search this Thread
 
Old Nov 21, 2007 | 11:37 PM
  #11  
Spring00gt's Avatar
Spring00gt
1st Gear Member
 
Joined: Oct 2007
Posts: 64
From:
Default RE: Not your average X-pipe question

BASSANI!!
Old Nov 22, 2007 | 02:02 AM
  #12  
01snake's Avatar
01snake
5th Gear Member
 
Joined: May 2007
Posts: 2,795
From: Michigan
Default RE: Not your average X-pipe question

i have dr.gas o/r x and have had no problems hitting. well that i can hear because there are slp 1's right behind it
Old Nov 22, 2007 | 12:27 PM
  #13  
01redstang's Avatar
01redstang
3rd Gear Member
 
Joined: Oct 2007
Posts: 735
From: California
Default RE: Not your average X-pipe question

BASSANI ALL THE WAY!!!!!!!!!!!!!!!!!!!
Old Nov 22, 2007 | 05:00 PM
  #14  
johnr2001gt's Avatar
johnr2001gt
2nd Gear Member
 
Joined: Nov 2007
Posts: 454
From:
Default RE: Not your average X-pipe question

I got mine from pypes its awesome great sound. no clearance issues.
Old Nov 22, 2007 | 05:08 PM
  #15  
tim2002gt's Avatar
tim2002gt
3rd Gear Member
 
Joined: Aug 2007
Posts: 670
From: Tulsa, OK
Default RE: Not your average X-pipe question

Dr. Gas makes an excellent x-pipe! The x is closer to the engine than most others which I believe is supposed to make it scavenge the exhaust gases better.
Old Nov 22, 2007 | 06:26 PM
  #16  
Hoppers04Gt's Avatar
Hoppers04Gt
Thread Starter
4th Gear Member
 
Joined: Dec 2005
Posts: 1,382
From: Athens, GA
Default RE: Not your average X-pipe question

Thanks for all the input guys.
Old Nov 22, 2007 | 06:34 PM
  #17  
Aereon's Avatar
Aereon
5th Gear Member
 
Joined: Aug 2005
Posts: 3,035
From: SF Bay.
Default RE: Not your average X-pipe question

slp x pipes sit the lowest out of all the ones I've seen, (bassani/pypes/dr.gas)
Old Nov 22, 2007 | 06:57 PM
  #18  
livefast1's Avatar
livefast1
5th Gear Member
 
Joined: Jul 2007
Posts: 2,363
From:
Default RE: Not your average X-pipe question

my buddies slp has had the clamps ripped off of it before because of it sitting so low.
Old Nov 22, 2007 | 07:07 PM
  #19  
Xemeth's Avatar
Xemeth
5th Gear Member
 
Joined: Jul 2006
Posts: 4,951
From: CT
Default RE: Not your average X-pipe question

My Pypes o/r x sits just like the stock H did. When you install it and bolt it to the catback, just make sure you hold the x and catback up as high as possible when tightening the bolts (which is a PITA when you're doing it on jackstands with nobody to help.
Old Nov 22, 2007 | 07:16 PM
  #20  
wes ley n the G T's Avatar
wes ley n the G T
3rd Gear Member
 
Joined: Jul 2006
Posts: 706
From: New Orleans, LA (westbank)
Default RE: Not your average X-pipe question

ORIGINAL: johnr2001gt

I got mine from pypes its awesome great sound. no clearance issues.
+1 I also have a Pypes o/r x-pipe and have no clearance issues. It actually never dragged over anything as for as I can recall. Good quality too



All times are GMT -5. The time now is 12:50 AM.