RE: DIY HID INSTALL on a 2007 V6
Very nice write up and pictures. It seems a lot of people are doing these HID upgrades where they just drop them into the stock housings. I know on other vehicles people have had problems with wiring melting because it's too much current for the stock wires and problems with discoloration and sometimes melting of the housing because the HID bulbs get too hot. It will be nice to hear the reports after people have had them installed for a year to see how they're holding up. I hope it is good because it's much better than spending $800 - $1,000 for them. -Joe
__________________

For more information, see my CarDomain Page @ My CarDomain
478rwhp/450tq @12psi 11.52 sec @ 119 mph 1/4 mile
|