[uedlose]

Wife's old set up. Procharger P600 17 psi kit making 9psi boost, hole in boot. 10.99 1/4 best 124--6.98 best 1/8 99 mphbest 60' 154. at different tracks
TFS TW heads Ported and Polished. Crane roller rockers.R-bock eagle 306cid 4340 crank. 5.4 scat H beam rods JE Pistons. Anderson Ford b-41 blower cam. long tube headers 3in exhaust with X pipe.42lbs inj. Edelbrock performer rpm intake lower ported to match heads. EPEC piggy back comp. with my tune. 83mm mass air75mm T/B. C-4 3800 rpm converter. 373 gears. strange struts. Cassis Engineering rear shocks C/E subs and rear control arms and Roll bar.Griffin rad.Full weight all power lessAC but still has heat. street car all runs on ET streets drive it any where. All work done by me but the machine work to the block. even the paint and body work.New set up is a Turbo80mm no runs yet.less cam and less gear.
New set up has ran 10.78 at 135 mph with the same cam and still not leaning on it yet with the tune. lots left in it.
[IMG]local://upfiles/7534/49E70E6CCC7843B8B76B67CA258D44CF.jpg[/IMG]