Just an update..
The part number I posted a few posts back is for the one big christmas tree that goes in near the wheel well.. you can reuse it from your stock skirts so you dont need them.. I returned them for the real christmas trees only to find that I did not even need to open the bags..
After pulling down the rockers as far as I could, I just slipped them out of the fasteners and slipped the new ones in their place.. I did not even remove the fasteners from the car..
I used the stock rockers as leverage to pull them down as much as I could. When I slipped the new ones on, one half of the fastener was still kind of stuck inside the rocker (sorry if that doesnt make sense), so I just used a flat head to dig them out..
Easy as pie..
First side took 20 minutes.. second side took 5
