The next part of the innovative system is the LMA-3
Its got built in sensors, or you can pipe in any 5V based sensor for it to log and display.
In the center of it there is a 3 bar MAP sensor that can be configured for boost, so I spliced into my nylon tube and ran it to the LMA-3.
I also spliced into my tach signal from the tach adapter,and the signal from the fuel pressure gauge, and put them into two of the sensor inputs.
The last 2 sensor inputs can be configured for G forces, both side force and accelartion forces.
To install this I just unplugged one wire (more like a plug from some headphones) and plugged them into this between the gauge and the A/F sensor control box.
At the very end of the chain is this little guy..
Its a bluetooth adapter!! So I dont even have to manually plug in the computer.. my little sony UMPC connects to the gauge system wirelessly and can then display anything the sensors are seeing, and log it in real time!
The log files are directly compatible with diablo sports line of tuners also so you can hand your log files to a tuner and he can give you a custum tune for a Diable sport tuner easily (from what I understand, I dont have the tuner yet cause I am waiting on the new one thats coming out soon)