5pony0

Trying to reattach speedo cable back to the cluster. Seems as though its on but when tested it pulls back off. Trying to press the retainer as I'm putting it back on, but so far it's not working.

Any tips/tricks is much appreciated.

Thanks

bighungrymatt

it should just snap back in

rust_stang

Mine went back together almost effortless..

ALMOST STOCK

Check to make sure thecable is fitting squarely and seated into the speedo.

5pony0

Thanks guys, I got it. Almost looked as if the white plastic peg in the end of the speedo cable was not quite centered, so it could have gone to the side instead of inside the hole.

I tried to gently straighten it and it snapped back on...all the way this time.

Thanks Again!

ALMOST STOCK

It's good to hear you got it figured out.

Bobert

Mine rattles like a bia

Does anyone have a link on how i can dissemble the clucter and get to it?

And should i bother replacing any bulbs, wires, screens, while i have it out??


Sorry for invading your post *

mjr46

^^^I believe there may be one in the sticky's/ tech articles