5.0 Build up questions

Martin5.0 · 10-19-2009, 02:25 PM

i have a stock 5.0 H.O Block, i am putting factory cran .rods with hyper pistons, z303 cam AFR 1422 heads (185 CC runner 58CC combustion chamber 202 Intake and 160 Exh valve)1.6:1 rockers and a BBK SSI Intake with 75mm TB and MAF 75mm calibrated for 30lb injectors.

Question is that will this be a good build and will 30lb injectors be to much for it? Will i need to have the ECM flashed for this build ? Please advise me

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Mustang Forums!

tinman · 10-19-2009, 10:50 PM

I would spend just a little more money and get forged pistons. The cast hyper's just really aren't what they are cracked up to be............

AdderMk2 · 10-19-2009, 10:57 PM

choose a new cam, and 30's shouldnt be too much, but 24's might be a better match

Martin5.0 · 10-20-2009, 12:26 PM

what cam would you suggest ? this is a daily driver but i want to have fun smokeing the ricers and vettes.

If you could be so kind and provide cam numbers or who makes it with a part number. i have limited time right now due to the fact im in Taji Iraq.

mjr46 · 10-20-2009, 12:44 PM

bbk ssi sucks , get an rpm 2 intake or a holley systemax and custom cam ftw, you won't be sorry

1ATony · 10-20-2009, 04:50 PM

the Holley's a sick intake

Martin5.0 · 10-21-2009, 11:56 AM

Andersonfordmotor.com has a system that i think im goin to go with . Its quick kit 2 , comes with heads intake cam ETC for 2450 bucks

sick92gt · 10-21-2009, 03:20 PM

I have that ssi intake and its sick! The 30lb injectors are perfect. I am having an ignition problem though and the car wont stay running any ideas?