5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Help with TRANSGO kit!

Thread Tools
 
Search this Thread
 
Old 04-18-2006, 09:35 PM
  #1  
inahury1
1st Gear Member
Thread Starter
 
inahury1's Avatar
 
Join Date: Aug 2004
Location:
Posts: 74
Default Help with TRANSGO kit!

I am installing the Hi rev kit in My AOD and I have no idea where the goverver valve is on the trans. I do not see anything that looks like the pic in instruction.

Thanks for any help, Preston
inahury1 is offline  
Old 04-18-2006, 09:53 PM
  #2  
inahury1
1st Gear Member
Thread Starter
 
inahury1's Avatar
 
Join Date: Aug 2004
Location:
Posts: 74
Default RE: Help with TRANSGO kit!

Is it in the tail shaft housing?
inahury1 is offline  
Old 04-18-2006, 10:07 PM
  #3  
92hatchLX
6th Gear Member
 
92hatchLX's Avatar
 
Join Date: Feb 2005
Location:
Posts: 8,439
Default RE: Help with TRANSGO kit!

Remove the tailshaft housing and all that is holding it in is 2 screws.
92hatchLX is offline  
Old 04-19-2006, 12:04 AM
  #4  
inahury1
1st Gear Member
Thread Starter
 
inahury1's Avatar
 
Join Date: Aug 2004
Location:
Posts: 74
Default RE: Help with TRANSGO kit!

Thats what I thought, Thank You very much! Looks like it is going to be a late night!

Thanks again, Preston

inahury1 is offline  
Old 04-19-2006, 10:37 AM
  #5  
inahury1
1st Gear Member
Thread Starter
 
inahury1's Avatar
 
Join Date: Aug 2004
Location:
Posts: 74
Default RE: Help with TRANSGO kit!

Got it all apart and installed the governer valve but they did not send a gasket for the tail shaft housig the ariginal one is not ripped or anything. Should I install a new one anyway?

Thanks,
inahury1 is offline  
Old 04-19-2006, 12:46 PM
  #6  
live4motocross11
4th Gear Member
 
live4motocross11's Avatar
 
Join Date: Aug 2005
Location:
Posts: 1,019
Default RE: Help with TRANSGO kit!

if its in the kit i would, let us no how u like the kit when u get it all done!!!
live4motocross11 is offline  
Old 04-20-2006, 08:09 PM
  #7  
live4motocross11
4th Gear Member
 
live4motocross11's Avatar
 
Join Date: Aug 2005
Location:
Posts: 1,019
Default RE: Help with TRANSGO kit!

did u ever get it in?
live4motocross11 is offline  
Old 04-20-2006, 10:09 PM
  #8  
ZachW04Stang
5th Gear Member
 
ZachW04Stang's Avatar
 
Join Date: Jul 2004
Location: Westminster, MD
Posts: 4,343
Default RE: Help with TRANSGO kit!

I wouldn't reuse a automatic transmission gasket. If theres the slightest gap trans fluid will find its way out through there and the gap will spread.
ZachW04Stang is offline  
Old 04-21-2006, 02:23 AM
  #9  
inahury1
1st Gear Member
Thread Starter
 
inahury1's Avatar
 
Join Date: Aug 2004
Location:
Posts: 74
Default RE: Help with TRANSGO kit!

Ya I got it back together but not on the ground yet had some other things to do while the car is still up, may be this weakend some time. I will let You know how it goes.

Thanks, Preston
inahury1 is offline  
Old 04-22-2006, 01:48 PM
  #10  
92hatchLX
6th Gear Member
 
92hatchLX's Avatar
 
Join Date: Feb 2005
Location:
Posts: 8,439
Default RE: Help with TRANSGO kit!

I didn't install it in my vert when I put the shift kit in it because I was in a time crunch to get it done. My shift kit still worked great.
92hatchLX is offline  


Quick Reply: Help with TRANSGO kit!



All times are GMT -5. The time now is 06:09 PM.