doing a research paper on building the fasted 5.0 mustang (need everyones input)
05-05-2006, 01:54 PM
#22
6th Gear Member
Join Date: Sep 2005
Location: Hamilton, NJ
Posts: 15,042
RE: doing a research paper on building the fasted 5.0 mustang (need everyones input)
351W ----> 418W (DART Block of coarse)
Completly Forged SCAT internals
AFR 225 Heads
Girldes
FPS Chrome Valve Covers
Edelbrock Manifold
Carb
Canton 7qt Pan
Double Roller Timing Chain
Custom Comp Cams Grind
LT's
O/R H Pipe
Chrome Timing Chain Cover
Don Hampton 6-71 Blower
FULL Suspension from Maximum Motorsports
Subframe Connectors
Battle Boxes
9' Complete Strange Rear w/ 3.55's
Performance Automatic SuperComp C4
10' Pro Launch TC
Reverse Manual Valve Body
Trans Cooler
Pistol Grip Shifter
Complete Set of Autometer Gauges
etc. etc. etc. etc.
Completly Forged SCAT internals
AFR 225 Heads
Girldes
FPS Chrome Valve Covers
Edelbrock Manifold
Carb
Canton 7qt Pan
Double Roller Timing Chain
Custom Comp Cams Grind
LT's
O/R H Pipe
Chrome Timing Chain Cover
Don Hampton 6-71 Blower
FULL Suspension from Maximum Motorsports
Subframe Connectors
Battle Boxes
9' Complete Strange Rear w/ 3.55's
Performance Automatic SuperComp C4
10' Pro Launch TC
Reverse Manual Valve Body
Trans Cooler
Pistol Grip Shifter
Complete Set of Autometer Gauges
etc. etc. etc. etc.
05-05-2006, 04:25 PM
#23
6th Gear Member
Join Date: Feb 2005
Location:
Posts: 8,439
RE: doing a research paper on building the fasted 5.0 mustang (need everyones input)
Get ready for this one...
1993 honda civic LX
swapped with a B1839945kkewrlk;lkejrwl;ekjr09340129341023 ferrari based 4 cyl. motor
some eibach stickers and a boeing 747 styled spoiler for handling
a turbonator to scare off 5.0 drivers
some NOS like Paul Walker has
and a full 36" exhaust
Now technically this BEAST can lay down about 10,000 to 100,000 horsepower depending on what cold air intake that you decide to go with, but either way, this IS the ultimate street machine.
1993 honda civic LX
swapped with a B1839945kkewrlk;lkejrwl;ekjr09340129341023 ferrari based 4 cyl. motor
some eibach stickers and a boeing 747 styled spoiler for handling
a turbonator to scare off 5.0 drivers
some NOS like Paul Walker has
and a full 36" exhaust
Now technically this BEAST can lay down about 10,000 to 100,000 horsepower depending on what cold air intake that you decide to go with, but either way, this IS the ultimate street machine.
05-05-2006, 04:43 PM
#24
6th Gear Member
Join Date: Sep 2005
Location: Hamilton, NJ
Posts: 15,042
RE: doing a research paper on building the fasted 5.0 mustang (need everyones input)
Well, since you idol Paul Walker so much just make sure that you dont hit a shot of NOS so big that your floor pans unbolt and wing neon green nuts and bolts all over the road 
ahahaha thats the best part of that whole movie!
ahahaha thats the best part of that whole movie!
05-05-2006, 05:41 PM
#27
3rd Gear Member
Join Date: Aug 2005
Location:
Posts: 693
RE: doing a research paper on building the fasted 5.0 mustang (need everyones input)
ORIGINAL: 88BlueGT
Well, since you idol Paul Walker so much just make sure that you dont hit a shot of NOS so big that your floor pans unbolt and wing neon green nuts and bolts all over the road ahahaha thats the best part of that whole movie!
Well, since you idol Paul Walker so much just make sure that you dont hit a shot of NOS so big that your floor pans unbolt and wing neon green nuts and bolts all over the road
ahahaha thats the best part of that whole movie!
05-05-2006, 05:55 PM
#29
4th Gear Member
Join Date: Sep 2004
Location: Bergen County, NJ
Posts: 1,804
RE: doing a research paper on building the fasted 5.0 mustang (need everyones input)
and then he goes and picks up vin diesel and vin gets in and sits normally. i thought there was no floor pannel? where does he put his feet???