Tims 88GT

9.1 in the 1/8th with street tires, now i have drag radials but im wating for my heads.

rsw007

5.0's can go really fast if you can get them to hook hard. good 60ft's on a bolt-on car can net high 12's and low 13's. you just have to get the 60ft's in the high 1.6's to low 1.7's.

91lxstang

well im gonna find out in an hour what my car runs lol

Synyster Racing

Hey 2 kwik, where do you live?

Closkey

I can only benchrace my time right now, but I should be running about a 13.5 or so.
I run right next to an ls1 car until about 65 and by the time we're at 100 theres about 2 cars between us. By bench racing standards, that's about 2 or 3 tenths slower than a car running a 13.2. I usually pull a fender off the line too.

However once I finish my h/c/i, do up my suspension, and lighten the car a tad more I'll be hoping for a low 12 on a tire. I wish there was a freakin track near me.

5.0stanger

If you don't mind telling, what suspention mods do you have? I would like to get mine to hook better to get under a 2.0 60', but I don't know where to start.

rsw007

drag radials, loose drag springs in front and tight lowering springs in rear. upper and lower control arms. sub frames. sure im forgetting something.

91lxstang

thats a cool car....

Synyster Racing

Here is a site that will help you guess about where you are at in the 1/4. http://www.ultimateresourceguides.com/content/

5.0stanger

Sounds about right...drag shocks? I have to start working on getting those things, starting with subframs and drag radials. Thanks