belt tensioner
#11
RE: belt tensioner
no but i can run the power rack with no power i have done it before and had no problems and i know a couple people that have been driving with power racks with now power for a couple years with no problems i just cant plug the hose holes or it will **** up
from the diagram it looks like i can run the belt with out getting a new idler
[IMG]local://upfiles/28839/E249FD86E285480AAE372986C5756488.jpg[/IMG]
from the diagram it looks like i can run the belt with out getting a new idler
[IMG]local://upfiles/28839/E249FD86E285480AAE372986C5756488.jpg[/IMG]
#13
RE: belt tensioner
Yeah I know you can do it, its just pain in the ***. I ran my car like that for about 2 days then just hooked it back up. Hack do you have an ac compressor? You know when the ac is off it's really acts the same as an idler pulley. I would route it how spooled up's diagram, thats how I routed mine when I did it.
#14
RE: belt tensioner
well this is the way the belt is going to sit and the tensoiner moves this far back im sure it will work fine
[IMG]local://upfiles/28839/DFDDB13C3FDC40AAAC9A32EA78709CF1.jpg[/IMG]
[IMG]local://upfiles/28839/DFDDB13C3FDC40AAAC9A32EA78709CF1.jpg[/IMG]
#15
RE: belt tensioner
yeah i have the ac compresor but it looks like crap its a dealer ac not factory and i really want to clean up the engine a lot
[IMG]local://upfiles/28839/597633BBFD764E7AB0C8AAFDE82C6FDA.jpg[/IMG]
[IMG]local://upfiles/28839/A8DDF9B7183E4C26ABFDF6E066804D63.jpg[/IMG]
[IMG]local://upfiles/28839/597633BBFD764E7AB0C8AAFDE82C6FDA.jpg[/IMG]
[IMG]local://upfiles/28839/A8DDF9B7183E4C26ABFDF6E066804D63.jpg[/IMG]
#16
RE: belt tensioner
if u route yoru belt that way it wont work... the wp will not spin.. if it does it wont at higher rps, and the tensioner dont bend back that far...
trust me I just got done working with my belt.. it wont work..
if u want a ac, ps, wp, alt, and crank.. the belt is a 850 (k060850, 850k6, 5060850)
Dave
trust me I just got done working with my belt.. it wont work..
if u want a ac, ps, wp, alt, and crank.. the belt is a 850 (k060850, 850k6, 5060850)
Dave
#18