GOOD site for Cylinder Heads?
09-04-2006, 12:03 PM
#1
2nd Gear Member
Thread Starter
Join Date: Feb 2005
Location: Greenville, SC
Posts: 248
GOOD site for Cylinder Heads?
What do ya think about this?
I found this in 5.0 Magazine, [URL=http://www.tristatecylinderhead.com/catalog/index.php?cPath=41] This is Tri State Cylinder Head Inc. They Have the GT40P built for $540.00 a pair.
5.0 High Swirl Alum heads $550.00 a pair w/t 64 cc chamber 1.94 int. 1.5 ext.
They also have Iron heads w/t 2.02 or 2.05 vlvs for $355.00 each.
Everyone is always trying to find a cheaper way to find some extra horses, this looks like a good place to look into for heads.
I found this in 5.0 Magazine, [URL=http://www.tristatecylinderhead.com/catalog/index.php?cPath=41] This is Tri State Cylinder Head Inc. They Have the GT40P built for $540.00 a pair.
5.0 High Swirl Alum heads $550.00 a pair w/t 64 cc chamber 1.94 int. 1.5 ext.
They also have Iron heads w/t 2.02 or 2.05 vlvs for $355.00 each.
Everyone is always trying to find a cheaper way to find some extra horses, this looks like a good place to look into for heads.
09-04-2006, 01:24 PM
#2
5th Gear Member
Join Date: Aug 2004
Location: Arizona
Posts: 4,103
RE: GOOD site for Cylinder Heads?
I dunno, sometimes if a deal is too good, it isn't a good deal.
For that sort of money I don't see that you could be getting much more than a low-end rebuild.
You might check with Indy cylinder heand (Aero). They do real nice work but I don't have an addy for them. Google it....
For that sort of money I don't see that you could be getting much more than a low-end rebuild.
You might check with Indy cylinder heand (Aero). They do real nice work but I don't have an addy for them. Google it....
09-04-2006, 01:28 PM
#3
4th Gear Member
Join Date: Mar 2005
Location:
Posts: 1,860
RE: GOOD site for Cylinder Heads?
09-04-2006, 02:11 PM
#4
3rd Gear Member
Join Date: Apr 2005
Location:
Posts: 543
RE: GOOD site for Cylinder Heads?
I'd like to see some reviews on how some of these heads performed for a budget build setup... or at least someone who has used them, that can speak up for the quality- because those seem like some damn good deals
09-04-2006, 02:34 PM
#5
3rd Gear Member
Join Date: Nov 2005
Location: Richmond, VA
Posts: 667
RE: GOOD site for Cylinder Heads?
09-04-2006, 03:20 PM
#6
2nd Gear Member
Join Date: May 2006
Location:
Posts: 394
RE: GOOD site for Cylinder Heads?
ORIGINAL: MADMAC
What do ya think about this?
I found this in 5.0 Magazine, [URL=http://www.tristatecylinderhead.com/catalog/index.php?cPath=41] This is Tri State Cylinder Head Inc. They Have the GT40P built for $540.00 a pair.
5.0 High Swirl Alum heads $550.00 a pair w/t 64 cc chamber 1.94 int. 1.5 ext.
They also have Iron heads w/t 2.02 or 2.05 vlvs for $355.00 each.
Everyone is always trying to find a cheaper way to find some extra horses, this looks like a good place to look into for heads.
What do ya think about this?
I found this in 5.0 Magazine, [URL=http://www.tristatecylinderhead.com/catalog/index.php?cPath=41] This is Tri State Cylinder Head Inc. They Have the GT40P built for $540.00 a pair.
5.0 High Swirl Alum heads $550.00 a pair w/t 64 cc chamber 1.94 int. 1.5 ext.
They also have Iron heads w/t 2.02 or 2.05 vlvs for $355.00 each.
Everyone is always trying to find a cheaper way to find some extra horses, this looks like a good place to look into for heads.
09-04-2006, 04:02 PM
#7
5th Gear Member
Join Date: Jul 2004
Location: Westminster, MD
Posts: 4,343
RE: GOOD site for Cylinder Heads?
Those high swirl heads are iron and are also known for being the junk heads that came on only 86 mustangs. You would loose performance swapping to the high swirl heads. They were designed for emissions only, not for performance.
The gt40p heads seem like a pretty good deal though. I would get the exhaust side ported out a little bit but they would make some decent power. But they are also iron.
The gt40p heads seem like a pretty good deal though. I would get the exhaust side ported out a little bit but they would make some decent power. But they are also iron.
09-04-2006, 11:36 PM
#9
5th Gear Member
Join Date: Jun 2005
Location: Frederick, Maryland.
Posts: 2,118
RE: GOOD site for Cylinder Heads?
ORIGINAL: OJMiles
www.thumperoforangepark.com
Been talking to that guy alot lately and he's really helpful..
www.thumperoforangepark.com
Been talking to that guy alot lately and he's really helpful..