Made some car-mod plans for next weekend. - Daddys new shoes!
#1
Made some car-mod plans for next weekend. - Daddys new shoes!
So over the past 3 weeks i've been making plans to do my 5 lug conversion.
First i started with the front end/front suspension. I picked up a set of OEM SN-95 balljoints, along with a set of Polyeurethane front A-Arm bushings. Making things springy will be a set of FRPP "B" springs, and KYB GR-2 shocks. Energy Suspension spring isolators are going in also. I will also likely pick up a set of energy suspension swaybar endlinks also.
Next, I picked up a set of SN-95 front spindles/rotors/calipers off a 95 GT, for the front end. Out back, i purchased a set of Moser C-clip 28spline axles, stock Fox length, in 5 lug, and a set of 5 lug drums. Later I plan on upgrading the rear end to SN-95 rear disks, and going with powerslot rotors all the way around, with hawk pads. I will likely upgrade my rear diff. to a Eaton carbon unit, and go with 31-spline axles.
Rounding out the setup, I purchased 4 10th Anniversary Cobra wheels charcoal w/ machined lips (pictured below). Sticking them to the road i purchased 4 BFGoodrich G-Force Sport. 245/45/17 up front, 275/40/17 out back. Should look good. For pictures of my car, and other mods, please visit the link at the bottom of the page for a current list of my mods, and a current(but poor) photo...
First i started with the front end/front suspension. I picked up a set of OEM SN-95 balljoints, along with a set of Polyeurethane front A-Arm bushings. Making things springy will be a set of FRPP "B" springs, and KYB GR-2 shocks. Energy Suspension spring isolators are going in also. I will also likely pick up a set of energy suspension swaybar endlinks also.
Next, I picked up a set of SN-95 front spindles/rotors/calipers off a 95 GT, for the front end. Out back, i purchased a set of Moser C-clip 28spline axles, stock Fox length, in 5 lug, and a set of 5 lug drums. Later I plan on upgrading the rear end to SN-95 rear disks, and going with powerslot rotors all the way around, with hawk pads. I will likely upgrade my rear diff. to a Eaton carbon unit, and go with 31-spline axles.
Rounding out the setup, I purchased 4 10th Anniversary Cobra wheels charcoal w/ machined lips (pictured below). Sticking them to the road i purchased 4 BFGoodrich G-Force Sport. 245/45/17 up front, 275/40/17 out back. Should look good. For pictures of my car, and other mods, please visit the link at the bottom of the page for a current list of my mods, and a current(but poor) photo...
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
folivier
Tennessee Regional Chapter
4
10-02-2015 05:32 AM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
09-25-2015 09:06 AM