When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
When installing a nitrous kit (wet), what adapter is needed to be able to use the schrader valve for the fuel line? I've looked around online but have found several different answers. Is this something that is semi-common and can be found at a local store or would it have to be ordered online? Also, would I have to remove the entire valve and replace it with a 4an fitting or is there an actual adapter to just place on top of it?
good post i was thinking about that too! any help guys?
I've seen so many different answers at different sites, i'm not sure what the deal is. I'm hoping ot find a simple part # or something. But even sites like summitracing seem to be a bit confusing. Not sure exactly what I need.
yes this is an old post.... but im having the same question right now... so either someone now hopefully knows, or samseed, ur see that i bumped ur post, and u will know by now... i hope u do, its a half year later, lol
I made one. I bought a tap with the same thread and made my own adaptor for a guage. I can find the tap on monday and tell ya the thread, or make up a few adaptors.