primetime5.0

have fun adjusting them for the right pinion angle

89 fox

as for the installation....pretty straight forward....drop the shocks and pull the springs out...the break loose the bolts(which i've heard can be tough sometimes) might wanna use a 1/2 ratchet or breaker bar....and put the new ones in

89 fox

thats true....get a pinion angle gauge....looks like a protractor and do some homework....yours are a little more involved than mine

musclemustang94

I called UPR and they told me how to do the initial setting. Sounds pretty easy, I am going to buy the gauge too though.

OnyxCobra

where are these axle bushings exactly?

Blue Oval

Onyx: they go where the upper control arm bolts to the dif

my urethane axle bushings just came in the mail today, got them from jegs for $39 shipped. only question is where do those washer-looking things on the left go?

musclemustang94

These are bolt in bushings right? Its not a press fit like the front controls arms is it?

89 fox

i think they are press in.....primetime5.0 was mentioning a tool to remove em.....

Blue Oval

i dont plan on using a tool, im gonna try drilling a bunch of holes thru the old one till it practically falls out then use a wire wheel to get the rest of the crap out

88BlueGT

wire wheels work excellent!