5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
Sponsored by Weld Racing
Welcome to Mustang Forums!
Welcome to Mustang Forums.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Lucky for you I already had it pulled I took tons of pics from start to almost finished..... nother couple of weekends til she's done. As far as making them level.....dunno. Haven't gotten that far yet.
I figured out the bottom part on this but where does it go through the firewall on an 86 with a speedometer cable. The picture looks like clutch cable goes into the speedo hole.
Was your car an auto to T5 swap??? If so, you have to take out the speedo cable, and re-route is thru the blank gromet about 5 inches to the left on the firewall, and the clutch cable goes in where the speedo cable went.
This should help with getting the pedal even with the brake. It came from the factory about two inches in front. This is the only thing I have even seen to help with this problem. But the link says it is for 94-2004 stangs. I think it could be made to work with a fox body, or you could make one yourself. If you go this route tell me how it works out as I have been thinking about it for a while now.
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor