Need a good off the shelf cam
#1
Need a good off the shelf cam
Im doing a bunch of motor work real soon (parts on their way) to my '92 and need to get a good off the shelf cam for it before I put it all together.
Here's what I have:
-stock 302 block and internals
-AFR 165 heads with upgraded springs
-Harland Sharp 1.6 roller rockers
-Summit roller lifters
-Edelbrock Performer intake
-AOD (soon to have a stall converter and shift kit)
I dont really want a custom ground cam because eventually Id like to do more work to the motor like a blower. I also dont really want a Ford Racing cam because Ive heard theres alot better cams out there.
Here's what I have:
-stock 302 block and internals
-AFR 165 heads with upgraded springs
-Harland Sharp 1.6 roller rockers
-Summit roller lifters
-Edelbrock Performer intake
-AOD (soon to have a stall converter and shift kit)
I dont really want a custom ground cam because eventually Id like to do more work to the motor like a blower. I also dont really want a Ford Racing cam because Ive heard theres alot better cams out there.
#2
RE: Need a good off the shelf cam
edelbrock has a new roller cam.its real good i hear...aaround 500 lift give ot take a lil,and about 220-230@50 is usually a real good area for street/strip area...tfs1,2 are good too,comp extrem energy rollers are good too..
#3
RE: Need a good off the shelf cam
No love for alphabet cams anymore? I've got an E-cam in mine, and my buddy built 2 blown motors both with F-cams. Seem to do alright off the shelf, but stillcant compare toa custom grind
Thread
Thread Starter
Forum
Replies
Last Post
Luke9222
4.6L General Discussion
19
10-22-2015 11:55 PM