5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

performance

Thread Tools
 
Search this Thread
 
Old 03-15-2007, 02:16 AM
  #1  
shayneC06
Thread Starter
 
shayneC06's Avatar
 
Join Date: Mar 2007
Location:
Posts: 16
Default performance

What can I do to improve my 94 cobra....I already have 3.73 gears,shorty headers,303 cam
shayneC06 is offline  
Old 03-15-2007, 02:17 AM
  #2  
90mustang5.8
I ♥ Acer
 
90mustang5.8's Avatar
 
Join Date: Aug 2006
Location: Saskatoon, SK, Canada
Posts: 4,921
Default RE: performance

how much money are you looking at spending?
90mustang5.8 is offline  
Old 03-15-2007, 02:20 AM
  #3  
shayneC06
Thread Starter
 
shayneC06's Avatar
 
Join Date: Mar 2007
Location:
Posts: 16
Default RE: performance

around 1000....I already have a 100 shot of. NOS just haven't installed yet
shayneC06 is offline  
Old 03-15-2007, 02:50 AM
  #4  
88ttop5.0
2nd Gear Member
 
88ttop5.0's Avatar
 
Join Date: Feb 2007
Location: Westchester NY
Posts: 358
Default RE: performance

Intake manifold and finish up the exhaust short throw shifter? maybe some drag radials?i would say roller rockers but i think the cobra ones are fine as is not terribly restrictive to the performance of the car. best of luck and nice car
88ttop5.0 is offline  
Old 03-15-2007, 04:00 AM
  #5  
gspfunk
5th Gear Member
 
gspfunk's Avatar
 
Join Date: Nov 2004
Location: Texas
Posts: 3,834
Default RE: performance

ORIGINAL: 88ttop5.0

Intake manifold and finish up the exhaust short throw shifter? maybe some drag radials?i would say roller rockers but i think the cobra ones are fine as is not terribly restrictive to the performance of the car. best of luck and nice car
I agree. Start w/ full exhaust, underdrive pullies,and possibly a shifter. Some better U/L control arms and XL subframes would be a wise investment as well.

The Cobra comes w/ 1.7 Crane roller rockers, decent heads, and a good intake, so I wouldn't mess w/ any of that until you've done the rest.
gspfunk is offline  
Old 03-15-2007, 04:08 AM
  #6  
Crazyfast50stang
5th Gear Member
 
Crazyfast50stang's Avatar
 
Join Date: May 2004
Location: Redondo Beach, CA
Posts: 2,128
Default RE: performance

A nice mid pipe and cat back. With that you should only be able to buy a cold air and pullies
Crazyfast50stang is offline  
Old 03-15-2007, 05:57 AM
  #7  
w8less
6th Gear Member
 
w8less's Avatar
 
Join Date: Feb 2005
Location: KY
Posts: 13,396
Default RE: performance

if u have the nitrous i wouldn't worry about any more hp upgrades since ur car already comes with the cobra intake and a gt40 heads.

i would start focusing on hooking up. buy some good upper and lower control arms subframe connectors and good drag radials suchs and the bfg's, nitto 555r's, or mt et streets (<---my preference). remember all the power in the world won't do you any good if u can't put in to the ground.

how big of a shot are u running?
w8less is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
Dokilar
4.6L (1996-2004 Modular) Mustang
15
10-16-2015 08:13 PM
Boostaddict
Lethal Performance
0
10-01-2015 08:58 AM
Boostaddict
3.7L V6 S550 Tech 2015 - 2017
0
10-01-2015 08:57 AM
tj@steeda
Florida Regional Chapter
0
09-30-2015 08:04 PM



Quick Reply: performance



All times are GMT -5. The time now is 03:27 AM.