k member help
#1
k member help
i was wondering if its ok to remove this bolt. i need to remove the k member to get to a few bolts and slide the engine forward. the bolt is really hard to push through the hole and i was wondering if there is any weight or anything resting on this. i do have the wheels on jacks to make sure but i want to double check with you guys
[IMG]local://upfiles/49575/3AB81985FD51456EA52C064FC5B7A56B.jpg[/IMG]
[IMG]local://upfiles/49575/9A31ADB7D94C4D6DB0506A26588F6DB0.jpg[/IMG]
[IMG]local://upfiles/49575/3AB81985FD51456EA52C064FC5B7A56B.jpg[/IMG]
[IMG]local://upfiles/49575/9A31ADB7D94C4D6DB0506A26588F6DB0.jpg[/IMG]
#6
RE: k member help
If you are removing the k-member you need to support the car differently. when you remove the k-member the control arms, rack & pinion, motor mounts all come with it. you need to support the car by the frame and also support the engine with a hoist.
If you take the control arm bolt out now the way you have it supported, if you even could get it out, the car would not be supported anymore and would fall to the floor damaging everything in the way of the control arms.....
If you take the control arm bolt out now the way you have it supported, if you even could get it out, the car would not be supported anymore and would fall to the floor damaging everything in the way of the control arms.....
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM