stroker build up
06-27-2007, 02:16 AM
#21
4th Gear Member
Join Date: Jul 2006
Location:
Posts: 1,897
RE: stroker build up
ORIGINAL: the new nos/man
heres my long block 408 its a 94 351w runs 10.09s with 200 shot. 1.44 60ft.
my pic is not working ? here
http://i5.photobucket.com/albums/y19...g?t=1182889764
heres my long block 408 its a 94 351w runs 10.09s with 200 shot. 1.44 60ft.
my pic is not working ? here
http://i5.photobucket.com/albums/y19...g?t=1182889764
Holy crap he's back from the dead [:-]
06-27-2007, 04:07 AM
#22
6th Gear Member
Thread Starter
Join Date: Feb 2005
Location: KY
Posts: 13,396
RE: stroker build up
ORIGINAL: adumb
you say 93 pump gas but then you say mix with meth for 112 octane.. which one is it going to be?
ORIGINAL: Jasperstang308
strip/street/weekend warrior.
the car will also be on 93 pump gas
ORIGINAL: the new nos/man
13to 1 ? dam what you plan on doing with this car btw? drag only ?
ORIGINAL: Jasperstang308
i am building a 351 stroker for a 86 notchback
here is what i want to get for it i am slowly piecing it together.
393
13.1 cr
meth injection
custom SR cam from jay allen
pro-systems carb
1 3/4 headers
vic jr intake (maybe ported would it be worth it?)
what heads would be better for this power plant?
TEA 225's (highports)
2.08 I 1.6 E
341 intake @700 lift 258 Exhaust @700
Fox Lake stg1 (Edelbrock Victor)
2.12 I 1.625 E
351 intake 255 Exhaust @700 lift
Please critique my set up i have almost 2,000 saved up for my heads so i almost there for my heads.
i wanting 500-550rwhp with this build am going to be close? any recommendations on RR's?
i am building a 351 stroker for a 86 notchback
here is what i want to get for it i am slowly piecing it together.
393
13.1 cr
meth injection
custom SR cam from jay allen
pro-systems carb
1 3/4 headers
vic jr intake (maybe ported would it be worth it?)
what heads would be better for this power plant?
TEA 225's (highports)
2.08 I 1.6 E
341 intake @700 lift 258 Exhaust @700
Fox Lake stg1 (Edelbrock Victor)
2.12 I 1.625 E
351 intake 255 Exhaust @700 lift
Please critique my set up i have almost 2,000 saved up for my heads so i almost there for my heads.
i wanting 500-550rwhp with this build am going to be close? any recommendations on RR's?
the car will also be on 93 pump gas
07-01-2007, 02:25 AM
#23
6th Gear Member
Thread Starter
Join Date: Feb 2005
Location: KY
Posts: 13,396
RE: stroker build up
ORIGINAL: r.barn
No Vic Jr. intake ............. get a Super Victor intake and have it port matched.
either head should be good.
careful on buying RR's early. just had friend had to grind on his
RR's to clear Canfield heads with upgraded springs from JayAllen.
I got the trickflow rockers myself, cause I noticed they had good
spring clearance design.
2" LT headers and 3" exhaust wouldnt hurt either.
No Vic Jr. intake ............. get a Super Victor intake and have it port matched.
either head should be good.
careful on buying RR's early. just had friend had to grind on his
RR's to clear Canfield heads with upgraded springs from JayAllen.
I got the trickflow rockers myself, cause I noticed they had good
spring clearance design.
2" LT headers and 3" exhaust wouldnt hurt either.
super vic and 2in headers.
do you think the TEA R series heads or TEA Highports 225's would be better? i have heard both heads are superior
07-01-2007, 10:54 AM
#27
6th Gear Member
Join Date: Dec 2006
Location: Citrus County, FL
Posts: 8,007
RE: stroker build up
*sighs*
http://www.chiheads.com
part # CHI 3V 225 C/A 8005A $2250.00 - CNC chambers, ferrea 6000 valves and isky springs good for solid rollers up to .625
OR
part # CHI 3V 225 S/A 8005A $2150.00 - same, but with ferrea 5000 valves (still very good, ferrea's are the best valves made)
AND
part # 9.5"W 3V 218-250 4150 $490.00 - intake for those heads on a 351w block for a 4150 style holley
.......and there you go
http://www.chiheads.com
part # CHI 3V 225 C/A 8005A $2250.00 - CNC chambers, ferrea 6000 valves and isky springs good for solid rollers up to .625
OR
part # CHI 3V 225 S/A 8005A $2150.00 - same, but with ferrea 5000 valves (still very good, ferrea's are the best valves made)
AND
part # 9.5"W 3V 218-250 4150 $490.00 - intake for those heads on a 351w block for a 4150 style holley
.......and there you go
07-01-2007, 12:55 PM
#28
5th Gear Member
Join Date: Jan 2006
Location:
Posts: 2,760
RE: stroker build up
ORIGINAL: Jasperstang308
are they that much better of a head FullAuto? i have no experience with them just wondering
also who makes headers for the Highports?
are they that much better of a head FullAuto? i have no experience with them just wondering
also who makes headers for the Highports?
07-01-2007, 01:27 PM
#30
6th Gear Member
Join Date: Dec 2006
Location: Citrus County, FL
Posts: 8,007
RE: stroker build up
full do you think they would outperform the CHI heads? i mean they are only a tad over 2k for the pair and hes got 2k for heads...... seems like a match made in heaven.
http://www.chiheads.com/our_results.php
http://www.chiheads.com/our_results.php