Wolverine, Ischy, Snyder, TFS cams ETC.
07-03-2007, 10:21 PM
#1
Thread Starter
Join Date: Jul 2007
Posts: 23
Wolverine, Ischy, Snyder, TFS cams ETC.
What cams traditionally work best with 5.0 mustangs?
Like AFR heads with Chevy and TFS heads with Ford; usually a performance company will build to suit mods and specs to flow better with GM or Ford. Which after market company makes cams to better suit Ford?
Anybody with any input, opinion, fact or any thing to say is welcome to post on subject.
Like AFR heads with Chevy and TFS heads with Ford; usually a performance company will build to suit mods and specs to flow better with GM or Ford. Which after market company makes cams to better suit Ford?
Anybody with any input, opinion, fact or any thing to say is welcome to post on subject.
07-04-2007, 12:56 AM
#3
5th Gear Member
Join Date: Jan 2006
Location: Puerto Rico
Posts: 3,926
RE: Wolverine, Ischy, Snyder, TFS cams ETC.
Geez.....
.....
DG88, it's not a matter of one aftermarket company been better with Fords, gms or mopars. You have to start looking at the cam specifications, valve, events, intended use, complete engine combo, etc, etc......you may want to check some good info regarding cams at http://www.wighat.com/fcr3/camtruth.htm ....the best choice for performance, driveability and economy (believe it, or not)......would be a custom cam. Buddy Rawls, or Jay Allen are well known custom cam designers that would provide a product based on your setup and goals, or provide you with an OTS camshaft recommendation based on real data.
.....DG88, it's not a matter of one aftermarket company been better with Fords, gms or mopars. You have to start looking at the cam specifications, valve, events, intended use, complete engine combo, etc, etc......you may want to check some good info regarding cams at http://www.wighat.com/fcr3/camtruth.htm ....the best choice for performance, driveability and economy (believe it, or not)......would be a custom cam. Buddy Rawls, or Jay Allen are well known custom cam designers that would provide a product based on your setup and goals, or provide you with an OTS camshaft recommendation based on real data.
07-04-2007, 01:46 AM
#4
Thread Starter
Join Date: Jul 2007
Posts: 23
RE: Wolverine, Ischy, Snyder, TFS cams ETC.
Yea i figured that but my intentions were not to infuriate anyone i was just trying to see if the old school mentality of companies is still around or if they actually remain loyal to specific auto makers.
07-04-2007, 02:23 AM
#5
5th Gear Member
Join Date: Oct 2006
Location: west chester
Posts: 3,305
RE: Wolverine, Ischy, Snyder, TFS cams ETC.
joel way to go man. DG88 take what he said and listen. Buddy Rawls is a great guy, i dealt with him and will be dealing with him again for my new project.
Thread
Thread Starter
Forum
Replies
Last Post
