94 G STANG

well back to the topic guys i pulled out the drivers side valve cover and the first rocker was loooooooooseee, it was barely on there and i had them all torqued and then some. Anyways i bought the adjustable pushrod and im going to measure it when i have a chance
too busy today, i guess i have to put some lok tite on the bolts to keep them in there.The other rockers were tight but i could turn the pushrod with my hand so i figure the rods are short, ill keep you guys posted .

OnyxCobra

My setup took the stock pushrod length of 6.25" and I've had zero problems so far.

94 G STANG

i figured it would be the same also since the cobra came with 1.7 rockers and same length pushrods but everyone says something different i want this baby done already and i want it done right. Shes calling can you hear it? come and drive me come and drive me!!

94StinkinLincoln

i have mangnum rollers and i didnt hear a peep from them, i went 1/2 turn past 0 lash. i was very suprised i didnt hear them.

ruger311

94,,, dont know why i can hear mine we've adjusted on them just about all we can from 0 lash 1/4 turn 1/2 turn 3/4 turn nothing,, comp says to set them 0 lash and lock them down no preloading, oh well runs pretty damn good right now so no complaints

94StinkinLincoln

yea i heard about how noisy they were and i starting getting worried, i put the motor together and i didnt hear a peep. idk if the eddy chrome VC's have any dampening features...i thought they made it louder...idk?