.550 lift is tough on retainer/guide relations
#11
RE: .550 lift is tough on retainer/guide relations
'77; Pardon me for omitting the word 'guide'.
The pictures you show is of the tool I've owned for 20+ years so I can do my own stuff at home, I use a low speed 1/2" drill that probably as old as you are....
I've done many, many sets of heads.
That tool has paid for itself many times over......
The pictures you show is of the tool I've owned for 20+ years so I can do my own stuff at home, I use a low speed 1/2" drill that probably as old as you are....
I've done many, many sets of heads.
That tool has paid for itself many times over......
#12
RE: .550 lift is tough on retainer/guide relations
well thats good to hear. i really should have accidentally brought the one home from work when the shop closed down, and the other cutter to do the spring pads too.
what guide OD size cutter you use? .500, .530, or .562
what guide OD size cutter you use? .500, .530, or .562
Thread
Thread Starter
Forum
Replies
Last Post