jhogan2424

Hi all! I'm looking for info on stuffin a 460 in my 93 notch. Anybody got any experience with this?

kura

I would stick with a small block like a 351w. Unless you know what you're getting into with a 460. It's very possible, and I've seen it done, but I hope you have a lot of time and money. My 2 cents, stroker 351w.

Gary H

Easy to do, do a search here and check out www.bigblockfox.com

This is a good reason why 460 rock
http://i45.photobucket.com/albums/f7...g/WheelieD.jpg

HaV

we have a 460 in an f350 at home.. absolutely tons of torque but it takes quite a bit to make power.. reliable motor though.. would be a lot of fun to stuff one of them into a fox

stangman94

buddy is putting a 460 in a 82 capri

TTGreenSN95

when i was like 20 forever ago i knew a guy that put one in a 80 foxbody took a stock one somebody gave him fabbed up some engine mounts and crossmember and he ran 12.99 spining like crazy he had like 800 bucks in the whole car i think it had a 2.73 ring and pinion in it and the stock little 14' tires lol. imigane what you could do if you really hooked one up nice!!!! good luck im thinking of getting antoher sn95 and putting one in it.

86_GT_Mustang

http://youtube.com/watch?v=DE-kyfTsZq4

stang8689

Jegs sells a whole kit with headers, motor mounts, oil pan and pick-up. Has something else tooI think

88BlueGT

Its nice because its different and it will definetly be a beast but IMO I rather go with a 351W based motor.

stang8689

I always wanted to do the same thing but stroke the 460, put aluminum heads on and a shot of nos