bbbngowc

Can someone help me out with my wipers? They aren't working and it looks as though it's because the wiper motor isn't connected to anything. Can someone please take a pic of where the wiper motor is connected and post it. I don't see where the wire is suppose to connect to.




[IMG]local://upfiles/64185/F944611029C146E49BC7425FA6778219.jpg[/IMG]

ALMOST STOCK

From the pic you have posted it doesn't look like either connector goes to the wiper motor.

bbbngowc

Man..Thanks a mil for taking the pic. Much Appreciated. From your pic it looks like the wire coming from your wiper motor is connected. You have 2 connections just sitting there right? They're not connected to anything right? I have 3 that are not connected. I understand 2 of those are suppose to be fir diagnostics but the third looks as tho it goes back to the wiper motor. I need to find where the other connector is.

ALMOST STOCK

It’s really hard to say which connectors you have in the pics you’ve posted so I went back outand took a close up pic of the 2 wire connectors that go to the wiper motor to see if this helps?


I’m wondering if possible one of the connectors you have in the pic you posted goes to the master cylinder like this?


and the one connector you aresure about for the EEC test port looks like this?
http://img.photobucket.com/albums/v4...romTomscar.jpg


I'm not sure what year car you have but if you can get the colors of the wires you could possibly track them down by using these links.
For 79-88 model cars
http://www.autozone.com/servlet/UiBr...3d8016713c.jsp

For 89-93 model cars
http://www.autozone.com/servlet/UiBr...3d8019595a.jsp

For colored wire diagrams try here.
http://www.veryuseful.com/mustang/tech/engine/

bbbngowc

Thanks again.

Nah, that's not the connector. Here's another pic. I don't think it's for the wiper motor any more. Thanks for the links.


[IMG]local://upfiles/64185/70D4B2AE30F44471A873216E927718B3.jpg[/IMG]

ALMOST STOCK

Does that connector look like this?


If that’s it ....then that connector also goes to the diagnostic tester for the ECC along with the triangular connector.

Just trying to help.

stang8689

those last plugs aren't used on mine either

bbbngowc

No that's not it. I have the two wires you have in this pic. There's a third right next to both of them that's not connected.