x303 cam
01-26-2008, 01:49 AM
#1
Yukon Cornelius
Thread Starter
Join Date: Oct 2005
Location: deep in the heart of dixie GEORGIA
Posts: 11,808
x303 cam
i picked up a explorer motor with the gt40 heads(1996)for 200$ then i found CHEAP x303 will it fit without notching the pistons anyone know"?? i plan on putting this in my cheap 1995 gts i just picked up[8D]
01-26-2008, 07:42 AM
#4
Banned
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
RE: x303 cam
ORIGINAL: lxman1
I think anything over a F303 will probably hit.
I think anything over a F303 will probably hit.
so like I said, it will probably fit, but checking PTV clearance is a must
01-26-2008, 07:52 PM
#7
4th Gear Member
Join Date: Jan 2008
Location: Louisville, Ky.
Posts: 1,326
RE: x303 cam
once again, we will make mention of the fact that total lift has NOTHING to do with PTV clearance...
so like I said, it will probably fit, but checking PTV clearance is a must
Well anthing larger than the F303 says right in the listings to check the clearance, that is why I said that.
That seems to be your standard paste and copy response.
so like I said, it will probably fit, but checking PTV clearance is a must
Well anthing larger than the F303 says right in the listings to check the clearance, that is why I said that.
That seems to be your standard paste and copy response.
01-27-2008, 06:52 AM
#8
5th Gear Member
Join Date: Jan 2006
Location: Puerto Rico
Posts: 3,926
RE: x303 cam
The X-303 is the "improved" version of the B-303...... same valve events, same duration, same overlap @.050" with added lobe lift.....even though I still have to see one that doesn't clear for PtV using Ford iron heads....... it's always best to check. And total valve lift has nothing to do with possible PtV problems.
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
