engin block information
#2
RE: engin block information
you need to pull the casting numbers off the block by where the starter would mount...but based on the xxx in the lifter valley.. I'd say one is a roller block maybe....but need casting numbers!! to verify year and what it's out of
#5
RE: engin block information
here is a guide to decoding casting numbers..so when you find something like this then you've found the right number
http://www.classicmustang.com/decoding_part_numbers.htm
http://www.classicmustang.com/decoding_part_numbers.htm
Thread
Thread Starter
Forum
Replies
Last Post