GT-40 BOX InTaKeS
#11
RE: GT-40 BOX InTaKeS
with your setup im sure it will benefit. it sounds like your engine is a deep breather, and those box intakes make power all the way up the power band, and if your just useing it for racing purposes, who cares if you lose a little down low, right? itll more than make up for it up top.
#13
RE: GT-40 BOX InTaKeS
Thanks all i think i will have to try it out and see how it goes... The lower intake has not been ported yet but i still have to figure all that out because i am running a NOS big shot plate and you can't really make the ports any larger in that area...
#14
RE: GT-40 BOX InTaKeS
I've used the Comp Polymer intake...
Before...
I had a stock cam 302 with 24's, and Cobra intake (upr and lwr)
Stock 2.73 gears
After...
I installed the box upper
some loss in the low end was obvious.
Top end gains were worth it.
jason
Before...
I had a stock cam 302 with 24's, and Cobra intake (upr and lwr)
Stock 2.73 gears
After...
I installed the box upper
some loss in the low end was obvious.
Top end gains were worth it.
jason
#15
RE: GT-40 BOX InTaKeS
Thanks for the input everyone... I just sold the gt40 and nos big shot plate... I am going with (ordered and can't wait)a super victor efi sqaure bore manifold with a 90 elbow and a zex perimiter plate system...
#16
RE: GT-40 BOX InTaKeS
ORIGINAL: 88ttops
Thanks for the input everyone... I just sold the gt40 and nos big shot plate... I am going with (ordered and can't wait)a super victor efi sqaure bore manifold with a 90 elbow and a zex perimiter plate system...
Thanks for the input everyone... I just sold the gt40 and nos big shot plate... I am going with (ordered and can't wait)a super victor efi sqaure bore manifold with a 90 elbow and a zex perimiter plate system...
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
daltron
5.0L GT S550 Tech
17
04-28-2016 08:10 PM