89mustangfive0

ok im in the market for heads and i was into getting a set of patriots but have further investigated found out there hit or miss. i wasl ooking into twisted wedge heads but there 2.02/1.60. i was told if i use that big of valves it will take my motor out of its rpm range and make power whee id ont want it to. ( street car). is this true? i found a sick deal on some t/w heads and 2 sets of rocker arms for 750$. if not im gonna stick to the edelbrock heads with 1.90 intake valves.

aode08

306 gt40 geads, b-cam, cai, msd6a, cobra intake 65mm tb, custom 3 inch h pipe with 40 sereis flows, 373's, cobra maf and injectors


Those are you mods?

What are your RWHP intentions with this new setup?

89mustangfive0

well i want new heads(tfs or edelbrock) and im gonna get a custom cam ground also and i have 2.5 inch exhaust now also. not really sure but im drooppin a 347 in next winter/spring

mjr46

have a cam taylor made to your combo and you'll be good to go..the twisted wedge will work okay for you

aode08

Im glad you told us, your getting a 347 soon, because you dont want to go buy something that will not let the 347 Breath.


400 HP 347 ftw.

89mustangfive0

ok becasue i was told the 2.02s wont do much of anygood for me with my 306

my77stang

i'd be looking at those new edelbrock 170's that are just coming out.

89mustangfive0

how much?? i was lookin at the twisted wedges because iw as offerd them bare but included is valves guides 2 sets of rockers and so on for 650

5spd GT

Get them for $650. Have a local shop check them out, and go have fun.

89mustangfive0

yea my dad will have them checked im about to get them.... if anything and i dont like them ill sell them. they are clean and have a 3 angle valve job