aod to t5 swap
04-09-2008, 01:48 PM
#1
1st Gear Member
Thread Starter
Join Date: Jan 2008
Location:
Posts: 82
aod to t5 swap
1992 mustang lx 2 door coupe ;]
the aod went out finally i can put a 5 speed in it.
questions.
i need new flywheel, clutch break assembly, t5 trans, clutch cable kit, anything else anyone can think of??
the aod went out finally i can put a 5 speed in it.
questions.
i need new flywheel, clutch break assembly, t5 trans, clutch cable kit, anything else anyone can think of??
04-09-2008, 03:27 PM
#2
M.A.D. Motorsports
Join Date: Jul 2006
Location: Indiana
Posts: 8,014
RE: aod to t5 swap
You need to use the search button to find some more information
. But while I am here, flywheel, clutch assembly (with pilot bearing), trans with bellhousing, 3 quarts of tranny fluid, cable kit, clutch peddle assmebly, and the shifter. That is all I can think of. If anyone else knows something I missed chime in.
. But while I am here, flywheel, clutch assembly (with pilot bearing), trans with bellhousing, 3 quarts of tranny fluid, cable kit, clutch peddle assmebly, and the shifter. That is all I can think of. If anyone else knows something I missed chime in.
04-09-2008, 04:42 PM
#3
Join Date: Mar 2008
Location: NY
Posts: 9
RE: aod to t5 swap
q Starter index plate
q Bell housing/scatter shield
q Pivot ball
q T5/T5Z transmission
q Shifter
q Shifter ****
q Shifter weather seal
q Shifter boot
q Flywheel
q Clutch kit (pressure plate, clutch disc, and throw out bearing)
q Pilot bearing
q Clutch fork
q Clutch cable
q Clutch cable clip (secures the cable to the bell housing)
q Pedal Assembly
q Clutch quadrant
q Speedometer gear
q Back-up light harness (Ford part# E7ZZ-15525-A)
q T5 transmission cross member
q Exhaust hanger
q Bolts:
Upper bell housing bolts (or washers to make up the extra length)
Pressure plate bolts
Starter plate to bell housing bolts
Transmission to bell housing bolts
q Bell housing/scatter shield
q Pivot ball
q T5/T5Z transmission
q Shifter
q Shifter ****
q Shifter weather seal
q Shifter boot
q Flywheel
q Clutch kit (pressure plate, clutch disc, and throw out bearing)
q Pilot bearing
q Clutch fork
q Clutch cable
q Clutch cable clip (secures the cable to the bell housing)
q Pedal Assembly
q Clutch quadrant
q Speedometer gear
q Back-up light harness (Ford part# E7ZZ-15525-A)
q T5 transmission cross member
q Exhaust hanger
q Bolts:
Upper bell housing bolts (or washers to make up the extra length)
Pressure plate bolts
Starter plate to bell housing bolts
Transmission to bell housing bolts
04-09-2008, 05:13 PM
#4
4th Gear Member
Join Date: Apr 2006
Location: Arkansas
Posts: 1,246
