How much vacuum with stock cam and gt40 heads/intake
#1
How much vacuum with stock cam and gt40 heads/intake
I just changed heads/intake to Gt40 Y heads and Gt40 tubular with Cobra RRs.
My vacuum hovers around 16 inches with the idle at about 780rpm and timing at 10 BTDC.
What should my vacuum be at?
I noticed that if I increase the idle speed, the vacuum will go up to almost 19-20inches.
Thanks in advance.
My vacuum hovers around 16 inches with the idle at about 780rpm and timing at 10 BTDC.
What should my vacuum be at?
I noticed that if I increase the idle speed, the vacuum will go up to almost 19-20inches.
Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
uberstang1
Classic Mustangs (Tech)
6
09-20-2015 06:42 PM
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM