Can anyone determine my rear end.
#1
Can anyone determine my rear end.
I know this is a long shot from just a picture but i was curious if anyone knows/can find out what rear end differential i have. Previous owner says its a 3.73 but i need to know for certain.
http://i214.photobucket.com/albums/c...4/DSCN1730.jpg
http://i214.photobucket.com/albums/c...4/DSCN1730.jpg
#2
RE: Can anyone determine my rear end.
Thats definetly a diff cover.
If you want to check the gears jack up the rear end, rotate the tire 1 full revolution. and count how many times the drive shaft spins. 3 and 3/4 turns is 3.73. 2 and 3/4 turns is 2.73 etc.
If you want to check the gears jack up the rear end, rotate the tire 1 full revolution. and count how many times the drive shaft spins. 3 and 3/4 turns is 3.73. 2 and 3/4 turns is 2.73 etc.
#3
RE: Can anyone determine my rear end.
ORIGINAL: Cbuss54
I know this is a long shot from just a picture but i was curious if anyone knows/can find out what rear end differential i have. Previous owner says its a 3.73 but i need to know for certain.
http://i214.photobucket.com/albums/c...4/DSCN1730.jpg
I know this is a long shot from just a picture but i was curious if anyone knows/can find out what rear end differential i have. Previous owner says its a 3.73 but i need to know for certain.
http://i214.photobucket.com/albums/c...4/DSCN1730.jpg
#4
RE: Can anyone determine my rear end.
You didn't ask how to find the gears but thought I would pass it along anyway.
Put the car in neutral, block the front wheels.
Raise the rear wheels off the ground.
Mark the bottom of the drive shaft and the bottom of a wheel.
Rotate the shaft, counting the total revolutions to bring the wheel back to its original location.
Put the car in neutral, block the front wheels.
Raise the rear wheels off the ground.
Mark the bottom of the drive shaft and the bottom of a wheel.
Rotate the shaft, counting the total revolutions to bring the wheel back to its original location.
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
22
10-01-2015 11:16 AM