1.7 roller rockers on stock engine
#21
RE: 1.7 roller rockers on stock engine
You may want to check this video it's not that the valve stays open......it's that the springs bounce and cannot keep the valve closed.
#22
RE: 1.7 roller rockers on stock engine
alright, thanks i was thinking of getting some new springs and the 1.7's. granted it wouldnt be any considerable hp gains but it'd be something and i can still use all that down the line with a new cam etc etc
#23
RE: 1.7 roller rockers on stock engine
ORIGINAL: Joel5.0
You may want to check this video it's not that the valve stays open......it's that the springs bounce and cannot keep the valve closed.
You may want to check this video it's not that the valve stays open......it's that the springs bounce and cannot keep the valve closed.
#24
RE: 1.7 roller rockers on stock engine
ORIGINAL: redpony88
yea i thought about it a little more later. but how would the lifters get passed up by the lobes? valve floats been something thats bothered me cause i've never quite understood how it happens. but like you've said before why even rev a stock 5.0 that high power drops off around 4500
yea i thought about it a little more later. but how would the lifters get passed up by the lobes? valve floats been something thats bothered me cause i've never quite understood how it happens. but like you've said before why even rev a stock 5.0 that high power drops off around 4500
http://www.youtube.com/watch?v=_REQ1PUM0rY
nevermind, that was just posted
#27
RE: 1.7 roller rockers on stock engine
ORIGINAL: Slo5oh
I love you too.
While were on the topic of springs...
What are the specs of the stock springs?
ORIGINAL: HACKGT350
that was just posted numb nuts
that was just posted numb nuts
While were on the topic of springs...
What are the specs of the stock springs?
http://www.jegs.com/i/Crane/270/WG2611/10002/-1/753386|10699
if those would be enough i may go with a setup like that with my stock heads till i have the money to do a full hci
#29
RE: 1.7 roller rockers on stock engine
ORIGINAL: HACKGT350
hahaha thank you. i have no idea what the specs are but the springs arent very good for anything other than stock cam
hahaha thank you. i have no idea what the specs are but the springs arent very good for anything other than stock cam
wondering:
od
Seat and open pressures
bind height
shim height
installed height
retainer size
lock angle
anyone that has the answers gets the prize.
#30
RE: 1.7 roller rockers on stock engine
ORIGINAL: Slo5oh
ok. I figgured as much. Do you atleast know if it is a 1.44 od?
wondering:
od
Seat and open pressures
bind height
shim height
installed height
retainer size
lock angle
anyone that has the answers gets the prize.
ORIGINAL: HACKGT350
hahaha thank you. i have no idea what the specs are but the springs arent very good for anything other than stock cam
hahaha thank you. i have no idea what the specs are but the springs arent very good for anything other than stock cam
wondering:
od
Seat and open pressures
bind height
shim height
installed height
retainer size
lock angle
anyone that has the answers gets the prize.