WLingle92lx

I found these valve covers on summitracing.com and wanted to know if they will clear the factory 1.7 RR's.

They say there for an 86-93 mustang but why not for the 94-95's.

http://store.summitracing.com/partde...746+4294908282+

sn95_331_GT_ yellow

the 94-95 cars have a different intake manifold than the 87-93 cars. ours have the 45* elbow that juts out over the valve covers. a taller valve caover will interfere with this design and not allow the upper to bolt down correctly. best bet is to get the valve covers and a 3/8" spacer for the intake manifold. that will clear your stock hood and let you use the valve covers. make sure they are for efi too, not carb since the PCV and filler locations are different. hope this helps.