assembely question.

Reply Subscribe

Thread Tools

Search this Thread

08-03-2008, 04:37 PM

Hung Like a Stang

4th Gear Member

Thread Starter

Join Date: Mar 2006

Location:

Posts: 1,467

assembely question.

What is the proper way to torque the polylocks on roller rockers on a 302? Do you use a torque spec. or a feeler gauge or both?

08-03-2008, 04:41 PM

mjr46

D.R. THE PATHETIC DORK

Join Date: Jun 2007

Location: West Virginia

Posts: 30,863

RE: assembely question.

you mean setting the preload ?? or after preload is set and tighten the allen set screw?? I just hold polylock with a wrench and tighten allen set screw as tight as I can

08-03-2008, 06:57 PM

uedlose

5th Gear Member

Join Date: Jun 2004

Location: Charles Town WV

Posts: 2,288

RE: assembely question.

^^^^ same here

08-04-2008, 03:28 AM

Hung Like a Stang

4th Gear Member

Thread Starter

Join Date: Mar 2006

Location:

Posts: 1,467

RE: assembely question.

Quote:

you mean setting the preload ?? or after preload is set and tighten the allen set screw?? I just hold polylock with a wrench and tighten allen set screw as tight as I can

well both. and Do you have to rotate the assembly for each cylinder or just tigheten each one the same?

08-04-2008, 10:12 AM

15austin

3rd Gear Member

Join Date: Dec 2006

Location: SW Missouri

Posts: 889

RE: assembely question.

Go to this website http://www.cranecams.com/?show=techarticle&id=2 scroll down till you see Adjusting Hydrolic Lifters for Proper Prelaod. That should tell you what to do.