1995mustang818

well guys i just about had it with this car lol..its my buddies notch it has some gt40 aluminum heads f cam holley system max 2 intake 65mm t/b 76mm maf bbk fuel pressure regulator long tube headers x piped i was wondering if you guys could help . what fuel pressure do you recomend and what should i set the timming at? also how much rwhp do think its at ? thanx alot guys

FivePointOhh

FP should be set @ 39psi vac line off. timing should be around 10-14* spout out. 10* is the factory setting. you can up it up if you'd like for performance but know you may need to run premium fuel to do this. $$

for rwhp? hard to say...maybe 270-290. not too sure about the heads performance but that cam is pretty lame.

15austin

That cam should make decent power IMO, but I think that intake is pretty lame. But I agree fuel pressure @ 39psi and timing @14*.

Portmaster

I'd say about 275 at the wheels, I think the Throttle body is kinda lame, lol (just kidding)

projectresto83

The system max isn't that bad of an intake but I wouldn't have chose it. Like already said 39psi no vac and 10-14 for timing. you can probably bump up the pressure some once you get it going and maybe a little more timing if you use higher octane gas.

15austin

My bad, I was looking at the 93 cobra intake in his sig was being lame....Holley is a good intake......Sorry

1995mustang818

dont worry about it bro lol its my buddies car it his cash lol i walk him all the time with my little junk yard set up still on a stock cam lol ...thanx alot guys ill let you guys know how it goes

1995mustang818

just so you guys know its still on 19lbs injectors and a stock fuel pump