heads?
#11
I agree!!!! If your building a 347, spend the $$$ to get a good head! ...I read too much of 347's with stock intake & heads! waste!
#12
311 inch and a 357 inch 8.2. I got a customer 408, hyd roller, 10.5:1, 190 fast as cast 3160lbs, 10.66 off the trailer. I am using alot of the heads lately. I try to use heads that are not dead ends per se'
#14
#16
trickflowtech,
I'm looking for 400+ hp to the wheels. I think trick flow will be the stuff I'm going to go with, track heat intake and twisted wedge heads. The heads say that you have to use headers that are made for the heads, but aren't they all univesal? I have BBK long tubes, do I need to go with something else.
I'm looking for 400+ hp to the wheels. I think trick flow will be the stuff I'm going to go with, track heat intake and twisted wedge heads. The heads say that you have to use headers that are made for the heads, but aren't they all univesal? I have BBK long tubes, do I need to go with something else.
Last edited by ark86stang; 02-06-2009 at 10:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post