Shifter issue!
#1
Shifter issue!
Ok hey guys...
I just installed a B&M hammer shifter for the mustang (94 gt auto) and it took me forever to get that thing on! horrible fitment of the "Gasket"!!!! anyways... I was wondering if there are any tricks with the shifter cable????
I had a REALLY hard time getting it to ratchet through all the gears... and now I got it to work but... it has a hard time going from 2 gear to Drive.... I don't get it??? everything else works flawlessly???
Is there a specific way to adjust it??
and what length and everything do i need from B&M's site when it comes to shifter cables??? I figure I can just upgrade and make it all run smoother!
ok hope that makes sense! thanks guys!
I just installed a B&M hammer shifter for the mustang (94 gt auto) and it took me forever to get that thing on! horrible fitment of the "Gasket"!!!! anyways... I was wondering if there are any tricks with the shifter cable????
I had a REALLY hard time getting it to ratchet through all the gears... and now I got it to work but... it has a hard time going from 2 gear to Drive.... I don't get it??? everything else works flawlessly???
Is there a specific way to adjust it??
and what length and everything do i need from B&M's site when it comes to shifter cables??? I figure I can just upgrade and make it all run smoother!
ok hope that makes sense! thanks guys!
#2
I kinda had the same issue putting this shifter on my turbo car. Mine is tight going through all gears. I just put its name to use, when im going up in gears i just hit the shifter. Maybe theyre supposed to be tight?
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
2.3L Eco-Boost Tech
2
11-24-2015 06:11 AM