Question about heads
#21
id go with some procomp heads they flow really good and are extremely cheap for their flow rate.
Here's an article on them they are pretty cheap
http://www.musclemustangfastfords.co...est/index.html
Here's an article on them they are pretty cheap
http://www.musclemustangfastfords.co...est/index.html
#22
id go with some procomp heads they flow really good and are extremely cheap for their flow rate.
Here's an article on them they are pretty cheap
http://www.musclemustangfastfords.co...est/index.html
Here's an article on them they are pretty cheap
http://www.musclemustangfastfords.co...est/index.html
Those guys at MM&FF are a bunch of hacks. Nothing agaist the heads but that 408 would have never left my shop only making 505hp with a set of 215cc CNC heads no matter who made them. My questions to them (or the main ones anyway.
Why is there a Wilson CNC ported Super Victor Intake Manifold sitting on a set of 190cc heads? The Intake has a power range of about 4800-8700 rpm When the heads fall off at 5800? Even on the 215cc heads it falls off at around 6200rpm
Why is there a cam in there with a LSA better suited to a Fuel Injected car that the carb set up?
Why do they keep talking about the flow at .700.? They aren't even getting close.
I could have thrown together a better combo in a bad dream.
With the same 215 crappy Pro Comps, Comp XE282HR cam, Victor Jr and a 830cfm HP Holley and would drag that boat anchor backwards and thats really mild.That thing they threw together is a pig.
Last edited by Portmaster; 03-10-2009 at 07:08 PM.
#23
http://www.fordracingparts.com/parts...tKeyField=6264
Anyone have a good experience with the Cobra Intake? Good power gain or anything?
Anyone have a good experience with the Cobra Intake? Good power gain or anything?
#24
http://www.fordracingparts.com/parts...tKeyField=6264
Anyone have a good experience with the Cobra Intake? Good power gain or anything?
Anyone have a good experience with the Cobra Intake? Good power gain or anything?
#25
id go with some procomp heads they flow really good and are extremely cheap for their flow rate.
Here's an article on them they are pretty cheap
http://www.musclemustangfastfords.co...est/index.html
Here's an article on them they are pretty cheap
http://www.musclemustangfastfords.co...est/index.html
#26
Im not supporting china F those commi bastards and there cheap as inferior products Im just saying they looked like a decent head for the price. And I say that in the kindest way possible not trying to get anyone into an argument
I work for ford I drive fords and will always support Ford, Gm, And Chrysler till the end. They built this damn economy now only if the rest of the US would get that into their head we might actually turn this country back around
I work for ford I drive fords and will always support Ford, Gm, And Chrysler till the end. They built this damn economy now only if the rest of the US would get that into their head we might actually turn this country back around
Last edited by 5.0kid; 03-10-2009 at 08:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post