Dash swap...not your average.
#1
Dash swap...not your average.
I've searched thought a lot of the threads here and havent found any describing rolling back a dash conversion.
I'm obviously fond of the Fox body four eyes, and i want my dash to match.
I have an 88lx, and i wanna gut and stuff in my interior from my 84/85gt.
I built a sweet guage cluster and thats also the motivation for this swap.
The skelton was a sticker on original dash, had to cut it out and apoxy it on, and the push button was from a pinball machine i have connected to a starter relay.
So, can anyone point me in the right direction for this?
any help is much appreciated.
thanks.
I'm obviously fond of the Fox body four eyes, and i want my dash to match.
I have an 88lx, and i wanna gut and stuff in my interior from my 84/85gt.
I built a sweet guage cluster and thats also the motivation for this swap.
The skelton was a sticker on original dash, had to cut it out and apoxy it on, and the push button was from a pinball machine i have connected to a starter relay.
So, can anyone point me in the right direction for this?
any help is much appreciated.
thanks.
#3
^^..ugh
is that custom dash of yours built off of an existing mustang dash?
make sure you have the correct sending units for the gauges
im not sure how your gunna be able to use the factory blinkers and what not.
is that custom dash of yours built off of an existing mustang dash?
make sure you have the correct sending units for the gauges
im not sure how your gunna be able to use the factory blinkers and what not.
#4
I have led's behind the plates where the original turn signal indicators were and sealed them to keep in the light.
That dash came out of my 84, i pulled the stock cluster and cut the mold to fit these guages. I think have all the sending units with the guages? i put the thing together like 4 years ago. I finally found a solid body to put all this stuff in just last month.
That dash came out of my 84, i pulled the stock cluster and cut the mold to fit these guages. I think have all the sending units with the guages? i put the thing together like 4 years ago. I finally found a solid body to put all this stuff in just last month.
Last edited by foxbodystyle; 03-10-2009 at 09:08 PM.
Thread
Thread Starter
Forum
Replies
Last Post
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM