fixing the rear
#1
fixing the rear
so my rear end isnt in the greatest shape so i bought a kit from LRS
http://www.latemodelrestoration.com/...0%201&comp=LRS
is this everything i will need? the cars the same one in my sig...just wanted to make sure ill be spinning both tires...
http://www.latemodelrestoration.com/...0%201&comp=LRS
is this everything i will need? the cars the same one in my sig...just wanted to make sure ill be spinning both tires...
#2
that should be everything ya need minus tools. i donno if ya have done gears before or are doing them yerself but heres a little list. a viener caliper, dial indicator, i like them w/ a magnetic base, and an inch lb dial gauge torque wrench, bearing puller. plus yer normal hand tools to take it apart and reassemble
also you will only be spinning both tires if you have a trac loc or another type of limited slip carrier
also you will only be spinning both tires if you have a trac loc or another type of limited slip carrier
Last edited by symonds86; 03-22-2009 at 07:15 PM.
#8
look at the tag on your rear end if it says something like 2L73 (just made up numbers) on the second line then its a trak lok. If it says 2 73 then it is gonna pull one-wheel wonders. Hope that helps.
#10