USED AFR 165 HEADS (ON BUDGET)

Reply Subscribe

Thread Tools

Search this Thread

04-17-2009, 04:54 PM

#21

OnyxCobra

6th Gear Member

Join Date: Nov 2005

Location: Rochester, NY

Posts: 8,467

yesss way to represent AFR! w00t

on another note though I've heard ported GT40s come close/beat the 165s, any thoughts on that?

04-17-2009, 04:55 PM

#22

Portmaster

5th Gear Member

Join Date: Nov 2008

Location: SC

Posts: 2,401

Quote:

Originally Posted by Chingky001

how did you get your car to get up to 500+ hp N/A?

11,000 dollars and 40+ years of experiance and lot of little tricks

04-17-2009, 05:05 PM

#23

symonds86

3rd Gear Member

Join Date: Oct 2008

Location: New York

Posts: 835

Quote:

Originally Posted by grabbem88

a few have done it this way...listen.

a 347 stock block

10.5 compression (i think..it's lower)
canfield heads 195cc
custom cam
vic jr intake
pro systems carb
1 3/4 george klass(accufab) headers 3 inch exhaust

he made over 500 rwhp/tq drives it daily

thats almost my combo but i have no nubers yet as its not done

04-17-2009, 08:48 PM

#24

cch

3rd Gear Member

Join Date: Nov 2008

Location: Canada

Posts: 741

Check these out... it's what I got. http://www.tristatecylinderhead.com/...products_id=40

1.94 intake
1.54 exhaust
60cc combustion chamber

will it out perform the afr 165's? I dunno... But for less then half the price they'll do the trick for me.

04-17-2009, 09:01 PM

#25

symonds86

3rd Gear Member

Join Date: Oct 2008

Location: New York

Posts: 835

theres a set of afr 165s AFR in the forsale section with rockers, in the foxbody section

04-17-2009, 09:22 PM

#26

NotchAbove

2nd Gear Member

Join Date: Feb 2009

Location: Maryland

Posts: 259

I went with thumper performance and am happy with them. However I have spoken to Mike @ thumper, and he told me while I was asking about valve size, and told me the biggest in an E7 head would be a 1.94, and even going that large you have some shouding.

I went with the 1.84/1.54 undercut GT40 Swirl Valves, happy with the results.

04-17-2009, 10:26 PM

#27

mjr46

D.R. THE PATHETIC DORK

Join Date: Jun 2007

Location: West Virginia

Posts: 30,863

fyi for those who don't know, you can get afr's new set up to the cam you have designed, you just have to know who to buy them from

04-18-2009, 07:33 PM

#28

Chingky001

Thread Starter

Join Date: Feb 2009

Location: Florida

Posts: 21

Quote:

Originally Posted by mjr46

fyi for those who don't know, you can get afr's new set up to the cam you have designed, you just have to know who to buy them from

thank you for helping me so far, but if i could get them set up to my cams, could you tell me which companys they are and their website or number, something, lol, sound like a long run win win type of thing