MustangForums.com

5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

valve covers

Thread Tools
 
Search this Thread
 
Old 05-25-2009, 08:30 PM
  #1  
morgan62
1st Gear Member
Thread Starter
 
morgan62's Avatar
 
Join Date: Apr 2009
Location: VIRGINIA
Posts: 80
Default valve covers
i bought a 1988 302 im putting in a 1996 i am using a 1995 intake i with a 1995 wirring harness, can not seem to figure out what valve covers to use the set i have is hitting the side of my upper intake does any one have a picture i can go by,thanks a lot
morgan62 is offline  
Reply
Old 05-25-2009, 08:49 PM
  #2  
86 5.0L
6th Gear Member
 
86 5.0L's Avatar
 
Join Date: Jul 2006
Location: San Diego, CA
Posts: 6,882
Default
you do know you need to swap kmembers also right?
86 5.0L is offline  
Reply
Old 05-25-2009, 08:55 PM
  #3  
morgan62
1st Gear Member
Thread Starter
 
morgan62's Avatar
 
Join Date: Apr 2009
Location: VIRGINIA
Posts: 80
Default
no i did not know that why should i
morgan62 is offline  
Reply
Old 05-25-2009, 09:00 PM
  #4  
morgan62
1st Gear Member
Thread Starter
 
morgan62's Avatar
 
Join Date: Apr 2009
Location: VIRGINIA
Posts: 80
Default
the motor is sitting in it fine
morgan62 is offline  
Reply
Old 05-25-2009, 09:09 PM
  #5  
HACKGT350
6th Gear Member
 
HACKGT350's Avatar
 
Join Date: Jan 2006
Location: new jersey
Posts: 6,635
Default
what engine was in the 96 you have?
HACKGT350 is offline  
Reply
Old 05-25-2009, 09:15 PM
  #6  
morgan62
1st Gear Member
Thread Starter
 
morgan62's Avatar
 
Join Date: Apr 2009
Location: VIRGINIA
Posts: 80
Default
it is a3.8 v6
morgan62 is offline  
Reply
Old 05-25-2009, 09:32 PM
  #7  
86 5.0L
6th Gear Member
 
86 5.0L's Avatar
 
Join Date: Jul 2006
Location: San Diego, CA
Posts: 6,882
Default
the kmembers are different for 94-95 5.0s and 96-98 3.8/4.6
86 5.0L is offline  
Reply
Old 05-26-2009, 05:38 AM
  #8  
smacked1
2nd Gear Member
 
smacked1's Avatar
 
Join Date: Apr 2009
Location: VA
Posts: 337
Default
wow there is alot of people on here from VA, what is the height of the valve covers you have now
smacked1 is offline  
Reply
Old 05-26-2009, 06:12 AM
  #9  
morgan62
1st Gear Member
Thread Starter
 
morgan62's Avatar
 
Join Date: Apr 2009
Location: VIRGINIA
Posts: 80
Default
i got two sets which is like ever thing else nothing works
morgan62 is offline  
Reply
Old 05-26-2009, 06:16 AM
  #10  
morgan62
1st Gear Member
Thread Starter
 
morgan62's Avatar
 
Join Date: Apr 2009
Location: VIRGINIA
Posts: 80
Default
i havent measured them what is getting in the way is the oil spout guess ill cut it off
morgan62 is offline  
Reply



Advanced Search
Quick Reply: valve covers


Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 11:14 AM.