Decking gt40 heads?
09-07-2009, 09:53 PM
3rd Gear Member
Thread Starter
Join Date: Mar 2006
Location: Harleysville PA
Posts: 956
Decking gt40 heads?
Does anyone deck or mill their gt40ps down to bump compression. Im not sure what it is stock. How much could I take off?
09-07-2009, 10:45 PM
Banned
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
gt-40P's already run higher compression that stock. they have a ~59cc chamber which (on a stock shortblock) makes around 9.5:1
09-07-2009, 10:47 PM
6th Gear Member
Join Date: Jan 2006
Location: new jersey
Posts: 6,635
im only milling mine to give them a fresh mating surface for the head gasket
09-07-2009, 10:54 PM
3rd Gear Member
Thread Starter
Join Date: Mar 2006
Location: Harleysville PA
Posts: 956
59cc, so what is the stock E7 comb. chamber size? If it will be at 9:5:1 ill just leave them alone.
09-07-2009, 10:59 PM
FudgeDrip
Join Date: Jan 2009
Location: `
Posts: 3,101
a friend of mine is running gt40s that have been milled so much that the valves won't let the deck surface lay flat on a table.
09-08-2009, 12:13 AM
6th Gear Member
Join Date: May 2004
Location: las vegas, nv
Posts: 9,092
Quote:
Originally Posted by
JayBanion
59cc, so what is the stock E7 comb. chamber size? If it will be at 9:5:1 ill just leave them alone.
i believe stock is 64cc and 9:1 cr
09-08-2009, 06:37 AM
6th Gear Member
Join Date: Jan 2006
Location: new jersey
Posts: 6,635
Quote:
Originally Posted by
luckythirteen13
i believe stock is 64cc and 9:1 cr
i thought stock compression was 8.5:1
09-08-2009, 09:10 AM
Banned
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
Quote:
Originally Posted by
HACKGT350
i thought stock compression was 8.5:1
Nope... 9:1
09-08-2009, 09:14 AM
6th Gear Member
Join Date: Dec 2006
Location: Citrus County, FL
Posts: 8,007
Quote:
a friend of mine is running gt40s that have been milled so much that the valves won't let the deck surface lay flat on a table.
good luck getting the intake to line up
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GimpyHSHS
4.6L (1996-2004 Modular) Mustang
19
12-19-2023 01:12 PM
mustangheaven
Motor Swap Section
3
01-03-2016 11:20 AM
kevsgt
2005-2014 Mustangs
5
10-09-2015 10:12 PM
mustangheaven
Classic Mustang General Discussion
2
10-07-2015 10:23 AM
Drastang
4.6L (1996-2004 Modular) Mustang
2
09-30-2015 03:48 AM
289 ,
302 ,
50 ,
deck ,
decked ,
decking ,
e7 ,
ford ,
gt40 ,
heads ,
intake ,
mill ,
mustang ,
sale ,
stock ,
work